Blog & knowhow
The HEAT³ EasyPack™ significantly reduces the time used for packaging modular units offsite and unpacking onsite. Perfectly fitting recyclable bags can reduce the packaging waste of the modules in the factory to zero. The HEAT³ EasyPack™ standardises your packaging procedures, minimising all risks concerning protecting modules during transportation and storage.
-
Shrink Wrap Removal and Recycling Guide for LDPE Film
Collected used packaging must be delivered to the waste management companies with the remaining film waste collected. Used thermal shrink packaging (material – LDPE, Plastic #4) can be recycled into other products. Please use this option! -
Anti-Corrosion Packs: When Do You Need Desiccants and When Not?
Desiccants adsorb water vapour and reduce relative humidity inside an enclosed pack. In controlled export packaging, they are commonly used together with a moisture barrier bag and a humidity indicator card to verify that the pack stayed dry. When do you need desiccants? Use desiccants when one or more of these are true: When can […] -
How to Prevent Damage to Shrink Wrapped Modular Units During Transport
1. Emergency repair kit for shrink-wrap while transporting Keep this kit in the truck or vessel for repairs if needed. 2) Loading and departure checklist Correct orientation on the trailer Immediate inspection after lifting Strips and fastenings 3) Straps and belts: the most common failure point Straps over sharp roof edges are the most common […] -
Shrink Wrap Bags vs. Roll Film: Why Pre-Manufactured Covers Save Time
What is the difference? Shrink-wrap bags are pre-formed from shrink film, usually sealed on one end and open on the other. Roll film is rollstock that you wrap around the load and then heat-seal to create a bag or enclosure before shrinking.In simple terms, bags reduce fabrication work on site, roll film requires fabrication work on site. […]